VIKING™ HWS MK 2 – (HOT WATER SUIT)

Ordering Codes: 2205170000

Designed principally for offshore saturation diving, but is also widely used by commercial divers and military divers where extended diving periods will be required, and a supply of hot water will keep the diver comfortable throughout the dive. The suit is manufactured from an abrasion resistant material which is also easy to clean, thus combining durability and comfort.

FEATURES:

  • Flexible material and pattern layout
  • Abrasion resistant RO-TEX™ nylon exterior
  • PU coating for ease of cleaning
  • Glued and stitched seams, with front seams coated for protection
  • PU reinforcements on knees and elbows
  • Unique “click” function valve with 3 flow settings and a dump mode, for increased diver comfort
Request a Quote

SKU 2205170000 Category


Share

DESIGN

Front entry. Fed by heated water from the surface.

SUIT MATERIAL

Base material: 5 mm neoprene

Exterior: RO-TEX™ nylon with a PU top coating

This construction creates a very abrasion resistant exterior, which can also be leaned down after diving. Underarm panels are constructed from 3 mm material, for maximum freedom of movement. The 2 front mounted pockets are also manufactured from the 3 mm material.

COLOUR

Black with contrasting grey stitching.

HOT WATER VALVE AND WATER FLOW

The VIKING™ HWS features an internal diamond profile rubber tubing covered with a layer of neoprene for comfort. Strategically placed holes are drilled into the tubing, and hot water is pumped down from the surface, and dispersed around the inside of the suit through these holes. The water temperature is controlled from the surface via instructions from the diver.

Narrow gauge neoprene tubing is placed at the wrists and the ankles to allow water to flow into the optional hot water gauntlet gloves and hot water boots. The hot water valve, designed specifically for VIKING™, has a unique “click” function, with 3 flow settings and a dump mode. The flow settings are HIGH, MED & LOW, and represent flow rates of approximately 49 litres/min, 44 litres/min and 36 litres/min. The inlet valve is a standard banjo fitting, which attaches to a QD ½” male fitting which is attached to the water supply hose.

The valve is mounted on the right hip and is easy to access.

SIZE RANGE

  • Small (SML) • Medium (MED) • Large (LGE) • Extra Large (EXL)
  • Extra Extra Large (XXL)
  • Small Tall (TSM) • Medium Tall (MET) • Large Tall (LGT) • Extra
  • Large Tall (EXT) • Extra Extra Large Tall (XXLT)

INCLUDED WITH EACH SUIT

Each VIKING™ HWS suit is supplied with a nylon carry bag and a user manual.

OPTIONAL ACCESSORIES

  • 5 mm neoprene gauntlet gloves with reinforced palms and Velcro attachment points. Sizes: MED, LGE & EXL
  • 5 mm neoprene boots with a rubber outsole and Velcro attachments. Sizes: MED, LGE & EXL

Velcro attachment points are mounted on the sleeves and the lower legs for the attachment of the optional gloves and boots.

CERTIFICATION & APPROVALS

The VIKING™ HWS is CE marked, after evaluation according to the necessary paragraphs of EN 14225-3:2017.

Contact Information

Tel : +44 1253 767 788

Address

iSubC Diving Equipment
Clifton Trade Park,
Unit 7, Brinwell Rd,
Blackpool FY4 4QU


Privacy Preference Center